High capacity pump

Description:

p_alte_porThe inlets and outlets are located on the base, while the input shaft can come out from the same side or the opposite side. This type of pumps gives priority to the flow-rate; this is possible thanks to higher displacement and the possibility to work with higher rotation speeds.  

  • Inlet diameter Ø = 10 or Ø= 14 mm according to the model
  • Outlet diameter Ø = 10 or Ø= 14 mm according to the model
  • Inlet and outlet center distance 24 or 25 mm according to the model
  • Pump fastening to the distributor or the engine by means of the pump screws

Dimensions and technical features:

  • External diameter Ø = 59 mm
  • Variable height, according to flow rate from 19 to 37 mm
  • Diameter shaft Ø= 7 mm with 2.5 mm drive
  • Max standard rotation speed 7000 rpm

 

Data refer to the following test fluid: oil with viscosity v = 24 cSt and temperature between 15°C and 20°C.